ASA plastic - acrylonitrile styrene acrylate is a plastic material with good thermal and dimensional stability, it is rigid and tough even at lower temperatures. ASA filament is very similar to ABS filament but has a few less disadvantages. Unlike ABS filament, it is resistant to UV rays, which means that the color does not fade in the sun like ABS. It is also slightly easier to print, as it does not shrink during printing like ABS, but it is still recommended to print in a case.
The filament thickness is 1.75mm (± 0.03 mm). Filament is compatible with most FDM 3D printers
Recommended settings:
Nozzle temperature: 230-260°C
Table temperature: 90-110°C
Note that the nozzle and table temperature varies depending on the use of different 3D printers.
| Teža | 1.45 kg |
|---|---|
| Dimenzije | 22 × 20.5 × 7.5 cm |
Bodi prvi ocenjevalec “ASA Bela”
Podobni izdelki
German 
Croatian 
Mnenja
Zaenkrat še ni mnenj.